Launching Inflatable Marine Rubber Airbag
video
Launching Inflatable Marine Rubber Airbag

Launching Inflatable Marine Rubber Airbag

Large inflatable lifting/water-launching inflatable rubber airbag Products Description Launching Inflatable Marine Rubber Airbag is China independent intellectual property rights of innovative products, the products are mainly applied to ship launching and landing, weight lifting, handling,...

Description

If the launching inflatable marine rubber airbag caters to your requirement, welcome to buy or wholesale with our factory. As one of the leading manufacturers and suppliers in China, we will offer you the most competitive price and the best service.

 

Large inflatable lifting/water-launching inflatable rubber airbag

 

Products Description

 

Launching Inflatable Marine Rubber Airbag is China independent intellectual property rights of innovative products, the products are mainly applied to ship launching and landing, weight lifting, handling, installation of underwater buoyancy aid etc. Nowadays, Marine rubber airbags are widely used in the world. The Products are less limited by space, no large mechanical equipment, can shorten the working period and save the unnecessary cost. Through years of development practice, marine rubber airbag is become more safety, effective and green environmental protection.

 

 

1

Advantages of launching inflatable rubber airbag

 

1. Big carrying capacity

 

2. High capacity against compression and twisting

 

5. Durable aging resistance and anti-wear characteristic

 

6. Higher flexibility and damping capacity

 

2

Standard specifications of  inflatable rubber airbag

 

1> Diameter (D): From 0.3m to 2.5 m.

 

2> Effective Length (EL): From 5m to 30m.(Supports custom diameter and length)

 

3> Total Length (TL): From 7m to 32m.

 

4> Other specification of ship launching airbags also available upon customer's request

product-2592-1936

 

3

Working pressure of  Launching Inflatable Marine Rubber Airbag:

 

product-722-384

 

4

Storage of the air bag

 

 

1.If the launching inflatable marine rubber airbag is not intended for service over an extended period, it shall be thoroughly cleaned with fresh water, air-dried in a well-ventilated environment with no direct sunlight, then uniformly dusted with French chalk both internally and externally. Subsequently, the air bag must be stored in a dry, cool, shady and well-ventilated indoor storage area with a stable ambient environment.

 

2.The designated storage location for the marine air bag shall be kept at a safe distance from all heat sources, including steam pipes, heating equipment, open flames and high-temperature mechanical components, to prevent thermal aging and material degradation of the air bag.

 

3.The marine air bag must be strictly isolated from any corrosive substances such as acids, alkalis, oily substances, greases and organic solvents during storage and handling, as such contact may cause irreversible damage to the rubber material and structural performance of the air bag.

 

4.When not in use, the marine air bag shall be fully spread out and laid flat on a clean, soft and smooth surface without sharp protrusions. Stacking heavy objects on the air bag and improper folding or piling of the air bag are strictly prohibited, so as to avoid permanent deformation, crease cracking and structural fatigue of the rubber and fabric layers.

 

5

Special attentions during the use of the airbag

 

* Control the working pressure strictly and it's not allowed to exceed the working pressure.

 

* There shall be no sharp and protruding hard object on the contact surface with the airbag in case it punctures the skin of the airbag .

 

* Try to avoid distortion happened to the length direction of the airbag

 

* Empty charge test shall be performed if the air bag is not used for a long time or reused after repair. Charge pressure if the airbag shall be the same as the test pressure valve when delivered. Inspectors shall be at least 3 meters away from the air bag. For air bag recovered from large damage, its working pressure shall be reduced reasonably. Besides, annual check shall be conducted on air bag which are used often.

 

* Do not drag the air bag on the ground.

 

6

FAQ

 

Q1: How can I get samples from you?

A: We are honored to provide you samples for check quality.Customers just confirm freight collect and then we could send out the sample by FedEx,DHL,UPS,TNT and so on.

 

Q2: What's certificates can your company provide?

A: We can provide CCS,ABS,DNV,LR,BV certificates.

 

Q3: What about your warranty time?

A: Our warranty period is 12 months.During this time,any problems about products from our factory,we solemn promise to change and repair them for free;if problems from customers' improper operating,we could provide free guidance and repair materials

Hot Tags: launching inflatable marine rubber airbag, China, factory, suppliers, manufacturers, wholesale, buy, price, Dock And Launch Ship And Vessels Rubber Airbag, Inflatable Rubber Fender, rubber pneumatic marine airbag, Marine airbag for ship launching, Marine airbag for ship lifting, Seal the balloon

(0/10)

clearall