How to Land a Ship Using Marine Airbags

Mar 16, 2026

How to Land a Ship Using Marine Airbags


1. Use the winch wire rope tie up hull

 

2. fill an airbag at the bottom, after inflate, can lift the ship bow to the right height, winch traction to move. Bottom flat type, air bag and the bottom contact area is large, the hull is small, just need one airbag can raise the ship bow. But sometimes, we can't resettle airbag from the front this time we need to put the airbag from one side to another. Some ship head is "V" shape, so the contact area of airbag and ship bottom is small, so the airbag can't lift the ship head, this time the air bag should put at the 1/4 position of ship. Be careful when remove the airbag in case of broke the airbag. If possible, we can dig a "V" groove to increase the contact area. The shipyard can bury airbag at right position when Low tide, pull the ship on them At high tide, then inflate, so the ship can be lifted easily.

 

3. start the winch, make the ship move slowly, and put the airbags as plan distance, pull the ship to the berth.

 

4. worked with the jack to lift the ship, build blocks to lift the ship, then pull out the airbags.